Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Guide to Metallurgy

Sticks, stones and bones can only carry you so far, but Mother Nature is infinitely generous with her gifts, among which she includes a marvelous class of materials - metals. Grateful and astounded, we accept it and pledge that it will not be wasted on trifles. It shall serve us greatly in mastering ways of cutting, slashing, gutting, chopping and slicing. We shall use it to harness flames and tame explosions, to travel swiftly across vast distances and to bring the Torch of Civilization to the realms of dark ignorance! Bless you, Mother!


Metallurgy concerns manipulating raw ores and turning them into metals, from which a myriad of tools, weapons and devices could be produced.

Before proceeding to metallurgy, it is recommended to check the Guide to Crafting for the basics of crafting.

Building the metallurgy equipment (kiln, bloomery etc.) requires certain research levels – check the Full Crafting List.

Basics

Obtaining metals

Different metals are produced from ores in different furnaces. See sections on Furnaces and on respective metals for more details.

General steps of metalworking

The primary component of metalworking is molds. At the very least, you will need a blacksmith pot or a blacksmith jug to melt ores in them.

  • Put ore or metal (ingots) in a blacksmith pot or a blacksmith jug.
  • Place a pot or a jug inside a kiln.
  • Light fire in the kiln and wait until the ore melts.
  • Pour molten metal into a mold of your choosing.
  • Take the mold and click a suitable(1) anvil with it(2).
  • Select a metal item to make(3).

(1): Some metals could only be worked on a more advanced anvil. For example, iron items are produced on the iron and steel anvils, not on the stone one. See the Anvils section.

(2): To make other items that are not cast via molds, click the anvil with metal ingots or sheets.

(3): The list of available items depends on the epoch.

Molds

Molds are made with Clay (to make clay, fill a container – a barrel, a bucket etc. – with water, dig dirt piles and click them with the container). Molds are used to cast tools and melee weapons from different metals. Each mold has a certain volume it can hold. 1 unit of volume = 1 unit of ore = 1 unit of molten metal = 1 metal ingot. Making different items requires a different amount of metal.

Clay molds are made raw and need to be fired in a campfire or an oven before using!

Blacksmith pot Made with 2 clay. Used to melt ores and metals in a kiln.
Blacksmith jug Made with 5 clay. Used to melt ores and metals in a kiln.
Ingot Made with 1.5 clay.
Knife Made with 1 clay.
Pickaxe Made with 3 clay. Add a wood handle to a pickaxe head to make a pickaxe.
Shovel Made with 3 clay.
Axehead Made with 1.5 clay. Add a wood handle to an axehead to make a hatchet.
Spearhead Made with 1.5 clay. Add a wooden handle to a spearhead to make a spear.
Arrowhead Made with 1 clay. Add an arrow shaft to an arrowhead to make an arrow.
Sword Made with 5 clay.

Furnaces

Furnaces are operated similarly to the campfire and ovens, apart from that they do not have continuous fire - the fire will go out after an operation is finished. Furnaces require 2 units of fuel per single operation, i.e. at least 2 wood logs or 1 piece of mineral coal. To insert items into a furnace be on help intent.

Kiln Made with either 10 clay, stone or sandstone. Used to melt all ores and metals in blacksmith jugs and pots, except for Iron.
Bloomery Made with 10 clay. Used to only smelt iron ore into sponge iron. Can also be used to recycle metal items back into metal.
Blast furnace Made with 25 iron. Used to only smelt iron ore into pig iron.

Ores and Metals

Some particulars about smelting certain ores and working with certain metals.

Kiln-only

Tin, copper, zinc, gold, silver, bronze and brass only need a kiln. Just melt ores in jugs and pots.

Bronze

Bronze is an alloy of tin and copper. You need to melt equal amounts (1:1 ratio) of tin and copper ore in the same jug or pot to produce bronze. For example, 1 unit of tin and 1 unit of copper make 1 unit of bronze.

Brass

Brass is an alloy of zinc and copper, available from 313 B.C. Its zinc comes from calamine, a pale zinc ore found by mining, crushing stone or sifting soil. Melt equal amounts (1:1 ratio) of calamine and copper ore in the same jug or pot to produce brass, the same way as bronze: 1 unit of calamine and 1 unit of copper make 1 unit of brass. Calamine melted on its own gives zinc, which can be cast into zinc ingots.

Brass ingots are used for ammunition casings, instruments such as the trombone and handbell, globes, razor blades and statues. Zinc ingots are used for electroplating; see the Guide to Electroplating.

Iron

* Smelt raw iron ore in the bloomery to obtain **sponge iron**. * Work sponge iron at any anvil into usable iron ingots. * To cast iron tools or weapons with molds, **put iron ingots in a jug or a pot and melt them in a kiln**.

Steel

* Smelt raw iron ore in the blast furnace to obtain **pig iron**. * Work pig iron at the iron or steel anvil into usable steel sheets. * To cast steel tools or weapons with molds, **put steel sheets in a jug or a pot and melt them in a kiln**.

Anvils

Anvils are used to forge armor and weapons across the centuries, from ancient swords to muskets and makeshift AK-47s. See the Guide to Weapons for more information on specific weapons and their availability in different ages.

Using anvils requires a Crafting skill of 1.20x.

Click anvils with a mold with molten metal or with some metal sheets or ingots to craft metal items.

Using iron, steel, bronze or kevlar sheets on an anvil opens the Crafting window with everything that metal can be forged into there, in one list. It works like the window for a material in your hand: search by name, use the tabs, click an item to see its cost and press Craft, or double-click a ready item to forge one straight away. Items you have too little metal for are listed under Missing something, and ones you have not learned under Not learned yet. Stay next to the anvil with the metal in your active hand while you work. Molds still ask what to cast in pop-up menus, and Classic interface brings the menus back for sheet metal too.

Stone Made with 25 stone. Used to work tin, copper, zinc, bronze, brass and sponge iron.
Iron Made with 20 iron. Used to work tin, copper, zinc, bronze, brass, gold, silver and iron.
Steel Made with 25 steel. Used to work all kinds of metals, plus kevlar.

Trip hammer

A trip hammer is a heavy hammer lifted by a turning shaft and dropped on the work. Fastened next to an anvil, it halves the time of everything you forge there, though no piece takes less than a second.

  • Build it from 10 wood, with 6 iron and 1 shaft held or at your feet. You need to know Watermills.
  • Stand it next to the anvil and fasten it with a wrench.
  • It only strikes while a treadwheel, horse gin, mill wheel or windmill is turning next to it. See Mechanical power.
  • Click it with an empty hand, or examine it, to see whether it is striking.

Machine shop

Three later machines also stand next to an anvil and take work off the smith. Fasten each with a wrench. An anvil uses its best hammer and its best fitting machine together, so a steam hammer, a drill press and a hydraulic press around one anvil all count.

MachineMade fromResearchWorks whenAt the anvil
Steam hammer16 iron, 1 shaft, 1 springSteam Powerit has fuel in its fireboxeverything takes about a third of the time
Drill press10 iron, 1 gear set, 1 shaft, 1 drive beltMachined Toolsa treadwheel, horse gin, mill wheel or windmill turns next to itguns, gun parts and machine parts take two fifths less time
Hydraulic press14 iron, 1 shaft, 2 bearingsFactoriesalways; it is pumped by handhelmets, armour and shields take two fifths less time
  • The parts are machine parts of any material, held or at your feet when you build.
  • Stoke the steam hammer by using coal, charcoal, wood, planks or bamboo on it. One coal pays for 4 forging jobs, one charcoal for 3 and one piece of wood for 1. The firebox holds fuel for 60 jobs.
  • A steam hammer replaces a trip hammer: only the better of the two counts.
  • Click a machine with an empty hand, or examine it, to see whether it is ready.
  • No piece takes less than a second, however many machines help.

Rolling mill

A rolling mill squeezes hot metal between two heavy rolls, and makes long stock from less metal than forging it.

  • Build it from 16 iron, with 2 gear sets, 2 shafts and 2 bearings held or at your feet. You need to know Railways and Steam Locomotion.
  • Fasten it with a wrench next to a treadwheel, horse gin, mill wheel or windmill. It only rolls while that machine is turning, and a faster one rolls faster. See Mechanical power.
  • Use iron or steel on it. It keeps rolling until the metal in your hand runs out or you step away, and the stock lands on the mill’s tile.
Metal usedThe mill rollsBy hand
1 iron2 pairs of rails1 pair
1 steel3 pairs of rails-
10 steel1 hull armour plate15 steel

You still need the research for what you roll, as you would to forge it.