Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Tool Materials

Most tools can be made from more than one material. A softer material is easier to come by and works more slowly; a better one works faster. You are never locked out of a job for lacking iron, you are only slower at it.

Reading a material

Examine any tool, weapon or part made of a material to see a Material line. It describes the material in plain words, such as how firm, tough and hard-wearing it is and whether it burns, rusts or throws sparks.

Picks, shovels and hatchets

The head sets how fast the tool works. Heads you cast in moulds or assemble from a head and a handle follow the same order as the ready-made tools:

HeadPickaxeShovelHatchet
BoneSlowestSlowestSlowest
Flint or stoneSlowSlowSlow
CopperBetween stone and ironBetween bone and ironBetween stone and bronze
BronzeA little slower than ironA little slower than ironA little faster than iron
IronThe usual speedThe usual speedThe usual speed
SteelFastestFastestFastest

A light handle speeds a pick or shovel up a little and a heavy one slows it down. A steel head on a tool you assemble yourself works at the full steel speed.

Hand tools in other metals

Hold a stack of the metal, open its crafting menu and look in Tools. The tool comes out named for its metal and tinted to match.

ToolUsual materialAlso made fromResearch
HammerWood (5)Copper, bronze or steel (3)Basic Toolmaking
ChiselStone, sandstone or ironBone (4), copper, bronze or steel (8)Basic Toolmaking
WrenchIron (5)Bronze or steelBasic Toolmaking
ShearsBronze or iron (2)Copper or steelBasic Agriculture
ScrewdriverIron (2)Bronze or steelIron Tools
SawIron (3)Copper, bronze or steelIron Tools
CrowbarIron (4)Bronze or steelIron Tools
WirecuttersSteel (4)Iron or bronzeIron Tools

Compared with the usual tool, copper works at about two thirds of the speed, bronze a little under full speed and steel a little over. You feel it when you saw logs into planks and when you fasten or unfasten something with a wrench.

Sickle and hoe

Both come with the Basic Agriculture research and are made from the stack you hold, under Tools.

ToolMade fromWhat it does
Sickle2 copper, bronze, iron or steel, with 1 wood and a hammer to handHarvests like a knife and also reaps ripe plants of the same crop beside the one you cut: 2 with copper, 3 with bronze or iron, 4 with steel.
Hoe2 wood, or 2 copper, bronze, iron or steelBreaks ground for planting the way a plough does. A wooden hoe works at two thirds of a plough’s speed and a metal one about matches it. It is small enough to hang from a belt.

Examine a sickle to see how many neighbours it reaps.

Soft tools wear out

A tool softer than what it cuts still works, but badly. You wait about four seconds before it bites, and the tool takes heavy wear each time.

WorkToolToo softCuts cleanly
Carving rock walls, cave floors and stone wallsChiselBone, copperStone, bronze, iron, steel
Carving marble or sandstone wallsChiselBone, copperStone, bronze, iron, steel
Cutting copper, aluminium, silver or gold cableWirecutters-Bronze, iron, steel
Cutting iron cable, barbed wire or chain-link fenceWirecuttersBronzeIron, steel
  • A tool in a metal that lasts less well than its usual one also wears a little on every such job, even when it is hard enough.
  • Examine a tool to see whether it shows some wear, is worn or is nearly worn out. A worn-out tool breaks.
  • Nothing here applies when you strike on harm intent.

Recipes that need a second material

Some builds need a second material as well as the one you are holding. A raft needs 2 rope and a carriage needs 20. The second material can be in your other hand, worn on you or lying at your feet. It is only taken when the build finishes, so a cancelled build costs you nothing. The Crafting window lists what a recipe still needs.

Machine parts

Gear sets, shafts, bearings, springs, drive belts and wheels are items you make from a material of your choice. Examine a part to see how much work it does and how long it lasts compared with the standard one; steel is the standard for gears, shafts, bearings and springs, and leather for belts.

PartBy handAt an anvil, under PartsCast in a parts mold
Gear setWood or bone (4), with a chiselBronze, iron or steel (4)Copper, bronze, brass, iron or steel
ShaftWood (2), with a hatchetBronze, iron or steel (2)Copper, bronze, brass, iron or steel
BearingWood (2) and 1 animal fat, with a chiselBronze, iron or steel (2), as a bushingCopper, bronze, brass, iron or steel
Spring-Bronze, iron or steel (2)-
Drive beltRope (3), leather (2) or cloth (3), with a knifeBronze, iron or steel (3), as a drive chain-
WheelWood (3), with a hatchet and a chiselBronze, iron or steel (4)Copper, bronze, brass, iron or steel
  • By hand: hold the stack, open its crafting menu and look in Machine parts. The tool can be held, worn or at your feet.
  • At an anvil: use bronze, iron or steel on the anvil and pick Parts.
  • Cast: shape an unfired parts mold from 3 clay (in Molds, with Bronze Working), fire it like any other mold, fill it from a blacksmith pot and use it on an anvil. You pick the shape there. Brass now pours into every mold at the same cost as bronze.

Wooden parts are the cheapest and the weakest: a wooden gear set does about two fifths of the work of a steel one and wears out five times as fast. Bronze and brass come close to iron. Metals that are too soft, such as lead, tin and gold, cannot be made into gears, shafts or bearings at all. Carving parts by hand needs Basic Toolmaking; springs need Bronze Working.

An iron-shod wheel is a wooden wheel with an iron tyre: hold 2 iron with a wheel and a hammer to hand, and pick it in Machine parts. It lasts twice as long as the bare wooden wheel.

Wheels go into bicycles. A pedal bicycle needs 8 steel or aluminium, two wheels and a drive belt or chain, fitted with a wrench; an aluminium one is about 15% quicker. A running bike needs 6 wood and two wheels and comes with the Carts research: it has no pedals or chain and is slower than a bicycle. See Pedal bicycles.

Lathes

A part you carve, forge or cast is rough. A lathe makes precise parts; examine a part to see which it is.

LatheResearchBuilt fromCutsYou also need
Pole latheWorkshops8 wood and 2 ropeWood, bone and brassA chisel held, worn or at your feet
Engine latheMachined Tools12 iron, plus a gear set, a shaft and 2 bearings of any material, with a wrenchCopper, bronze, brass, iron and steelNothing; it works twice as fast

Both are in the Economy & production crafting menu of their main material and are fastened down with a wrench like other workshop machines. The parts that go into an engine lathe can be rough, so you never need a lathe to build your first one.

  • Turn a new part: use a stack of the material on the lathe and pick a gear set (4), shaft (2) or bearing (2).
  • True a rough part: use a rough gear set, shaft or bearing on the lathe. It keeps its material and becomes precise.

Springs, drive belts and chains are never turned.

Parts inside machines

The hand mill, the large mill, the large and powered saw mills, the loom, the printing press and the wind and water generators have working parts that wear out. Examine one to see its parts, their condition and how fast the machine is running.

MachinePartsBuilt with
MillShaft, bearingWood
Large millGear set, shaft, bearingWood
Large saw millGear set, shaft, bearingWood
Powered saw millGear set, shaft, bearingIron
LoomShaft, bearingWood
Printing pressShaft (the press screw)Wood
Waterwheel generatorShaft, bearingWood
Wind chargerGear set, shaft, bearingIron
Wind turbineGear set, shaft, bearingSteel
  • A new machine runs at its usual speed. Each finished job wears its parts a little; the wooden parts a machine is built with last about 400 jobs.
  • A worn part makes the machine a quarter slower. A failing part sometimes jams a job before it starts. A worn out part stops the machine.
  • To replace a part, use a gear set, shaft or bearing on the machine. A part you fitted earlier comes back out; the original part is scrap.
  • The machine works as fast as its weakest part. Bronze, iron or steel parts in a wooden machine make it faster, up to a quarter faster than usual, and last several times longer.
  • The powered saw mill, the wind charger and the wind turbine need accurate parts. A rough part fitted to one runs at 60% at best, so true your parts on a lathe first.
  • A generator’s power follows its parts in the same way: better parts give more power and a worn out part gives none. Generators never jam, and a standard set lasts about 110 hours of running.
  • Taking a machine apart with a hammer gives back the parts you fitted, with their wear. The original parts and worn out parts are lost.

Pipes

Pipe can be made of bamboo, logs, lead, copper, iron or steel. Tougher material carries more of a pump’s flow, a network runs at its weakest pipe, and lead pipe slowly poisons the water. See Factory Automation for the table and the hand pump, wooden intake, cistern and water trough.

Cannon barrels

With the Cannon research you can make the cannon from more than steel. Hold the stack, open its crafting menu and look in Siege Weapons.

CannonMade fromBarrel lastsHow it ends
Cannon (steel)35 steelNo limitIt does not wear.
Iron cannon35 ironAbout 204 shotsNo warning. Once it has fired about half of that, any shot has a small chance to burst it.
Bronze cannon35 bronzeAbout 101 shotsThe barrel starts to bulge at three quarters, splits when spent, and bursts on the shot after.
Iron-hooped wooden cannon12 wood, 4 iron and a hammerAbout 5 shotsThe same warnings as bronze.
  • Examine a cannon to read its barrel, how many shots it is good for and its condition.
  • A bursting barrel explodes where the cannon stands and destroys it. Stop firing a bulged barrel and stand clear of an old iron one.
  • Artillery and tank guns always have steel barrels.

Sparks

Iron, steel and flint throw sparks. If you strike a barrel that holds gunpowder or fuel with a tool made of one of them while on Harm intent, there is a small chance each blow sets it off. Tools of bronze, copper, wood and bone never spark, so keep a bronze or copper set for work around powder and fuel. Examine a barrel to see whether its contents are dangerous. Filling, pouring and carrying a barrel are always safe.